How would you increase building interior energy efficiency using the same heating and cooling systems? - floor cooling systems picture
In other words, low heating and cooling capacity of AC / heating?
Doors, windows and fans are already opened, and lighting, electricity and sanitation are the highest level of efficiency and the level of thermal resistance value has been installed on the exterior walls of the building ..
The only question is how much heat and cool air is leaking into the building through the construction of walls, floors and ceilings.
Sunday, January 31, 2010
Floor Cooling Systems Picture How Would You Increase Building Interior Energy Efficiency Using The Same Heating And Cooling Systems?
1 comment:
In most homes, the air infiltration, a common problem in the winter and summer. In addition to the usual places, such as, for example, doors and windows, chimneys and other perpetrators of the loft spaces. Pull down the stairs to the attic is very large. Everything you need to do is a garbage bag in plastic and placed high in a horizontal dropdown menu the stairs and see the result. Conventional doors to the stairways and attic areas are not stripped and usually time is also a problem. Fireplaces are also those with closed records is a good way to escape the heat in the winter.
Large overhangs on the exterior walls to keep the direct sunlight on the side of buildings, is neglected in most cases. If you looked at many old houses in the southern United States to reduce large overhangs and porches on east and west sides of the direct solar radiation hitting the walls.
Where buildings proposed to be make-up of heat exchangers can be installed to some heat from the inside (or cooled) air to go outside.
Post a Comment